voice-mail-setting
This command configures the voice mail parameters.
Syntax
(config-voip)# gateway voice-mail-setting (gw-voice-mail)#
|
Command |
Description |
|---|---|
|
dig-to-ignore-dig-pattern |
A digit (0-9,A-D,* or #) that if received as Src (S) or Redirect (R), the digit is ignored and not added to that number. Used in DTMF VoiceMail. |
|
disc-call-dig-ptrn |
Disconnect call if digit string is received from the Tel side during session. |
|
enable-smdi {SMDI_PROTOCOL_BELCORE|SMDI_PROTOCOL_ERICSSON|SMDI_PROTOCOL_NEC_ICS|SMDI_PROTOCOL_NONE} |
Enables the Simplified Message Desk Interface (SMDI). |
|
ext-call-dig-ptrn |
Digit pattern to indicate external call (PBX to voice mail) |
|
fwd-bsy-dig-ptrn-ext |
Digit pattern to indicate Call Forward on busy (PBX to voice mail) |
|
fwd-bsy-dig-ptrn-int |
Digit pattern to indicate Call Forward on busy (PBX to voice mail) |
|
fwd-dnd-dig-ptrn-ext |
Digit pattern to indicate Call Forward on Do Not Disturb (PBX to voice mail) |
|
fwd-dnd-dig-ptrn-int |
Digit pattern to indicate Call Forward on Do Not Disturb (PBX to voice mail) |
|
fwd-no-ans-dig-ptrn-ext |
Digit pattern to indicate Call Forward on no answer (PBX to voice mail) |
|
fwd-no-ans-dig-ptrn-int |
Digit pattern to indicate Call Forward on no answer (PBX to voice mail) |
|
fwd-no-rsn-dig-ptrn-ext |
Digit pattern to indicate Call Forward with no reason (PBX to voice mail) |
|
fwd-no-rsn-dig-ptrn-int |
Digit pattern to indicate Call Forward with no reason (PBX to voice mail) |
|
int-call-dig-ptrn |
Digit pattern to indicate internal call (PBX to voice mail) |
|
line-transfer-mode |
Line transfer mode. |
|
mwi-off-dig-ptrn |
Digit pattern to notify PBX about no messages waiting for extension (added as prefix) |
|
mwi-on-dig-ptrn |
Digit pattern to notify PBX about messages waiting for extension (added as prefix) |
|
mwi-source-number |
Phone number sent as source number toward PSTN for MWI setup. |
|
mwi-suffix-pattern |
MWI suffix code to notify PBX about messages waiting for extension (added as suffix to the extension number) |
|
smdi-timeout |
SMDI timeout. |
|
vm-interface {dtmf|etsi|ip2ip|ni2|none|qsig|qsig-matra| qsig-siemens|setup-only|smdi} |
Method of communication between PBX and the device that is used instead of legacy voicemail. |
Command Mode
Privileged User
Example
(config-voip)# gateway voice-mail-setting (gw-voice-mail)# vm-interface dtmf (gw-voice-mail)# activate